pad
HomeKeep it Cool KitsThermaltake Hardcano 9 Hard Disk Drive Cooler
Thermaltake Hardcano 9 Hard Disk Drive Cooler

pad






Thermaltake Advanced System Controller
Application:
  • Design for 5.25" drive bay
  • Temp. alarm LCD monitor
  • 4 adjustable fan speed controllers
  • Aluminum housing
Features
ON / OFF: power on or power off switch.
ºC / ºF: Celsius and Fahrenheit display switch.
RESET: clean the temperature setting. (MAX & MIN)
REC: please adjust the pre-setting temperature by using the cross-head screw driver. When it shows the temperature you would like to set, ( the screen should be shown without MIN or MAX, see figure 1), please press the button to record the temperature.
Alarm Temp. Setting: Control the temperature you would like to set.
Temp. Display with alarm Specification:
  • Range: 0 ºC ~ 90 ºC (32 ºF ~ 194 ºF)
  • Resolution: 0.1 ºC (0.1 ºF)
  • Accuracy: +/-1 ºC (+/-2 ºF)
  • Sampling rate: 3 sec
  • Alarm setting range: 40 ºC ~ 90 ºC
  • Power: Lithium battery CR2032 3V

There are two temperature shown on the screen (T1, T2). T1 always mean pre-setting temperature as well as T2 representatives the temperature from sensor.

Note:
When the screen is shown MAX(Figure 2), it means the highest temperature you have recorded. In the meanwhile, T1 is the highest temperature you set, T2 is the highest temperature that the sensor detected.
On the other hand, MIN (Figure 3)means the lowest temperature that have been recorded.
Fan speed controller operation
If the fan unit you wish to control is over 0.35Amp, please connect it to either Speed Controller # 2 or 3. However, the total current of fan unit is less than 0.35Amp, please connect it to Fan1 or Fan 4.
If you wish to control a fan unit with a 3pin power connection, please use the included CPU Fan Adaptor.  Once connected, you may still monitor the RPM by connecting the Yellow wire directly to motherboard.
Example
An efficient way to control the fan units is to chain connect each Silent Fan Units.
Then attach this set to one of the Speed Controllers.
*If 4 or more Silent Fan Units are chain connected altogether, please attach the set to either Speed Controller #2 or #3.  This is because each Silent Fan Unit requires 0.10Amp:
[0.1Amp X 4 Silent Fan Units] is greater than 0.35Amp, so it must be connected to Fan2 or Fan3 only.




Availability: Usually ships the next business day.

A1659padRegular price: $29.99padSale price: $25.99pad

Reasons To Shop Circotech Online
15 Years in Business - Serving thousands of satisfied customers, we're in business to serve you.
Top Service - We are awarded with "Top Service" from third party survey.

Secured Online Order - Online order system use industry-standard Secure Sockets Layer (SSL) technology to prevent the information from being intercepted.

Flexible Order System: You can either order online or just give us a call, both ways are welcomed.
Fast Shipping - There are many Types of shipping methods, UPS and Fed Ex from ground to overnight mail. Also available is USPS, we always ship out customers order within 48 hours (excludes weekend and holidays) when applicable.

Warranty -
All parts carry 1 year parts and labor warranty from Circo or you can also take advantage of manufacturer's Extended  warranty whenever possible.
Privacy -
All information you submit to us will remain confidential (including email address, street address , phone number, credit card, and even the product you choose).  We respect the privacy of our customers!

Circo Technology, Corp.
20454 Carrey Road
Walnut, CA 91789
Phone: (909) 468-3790
Fax: (909) 468-5658
Order: 1 (800) 678-1688

Sales:
Government:
Tech Support:

sales@circotech.com
govsales@circotech.com
support@circotech.com

FPO APO Welcome


| Home | Aluminum Cases | Med Tower Cases | Case Mod Kits | Full Tower/Servers | Rack Mount Cases | Cube Servers | Special Color Cases | SCSI External Cases | Power Supply | Removable HD KitsOur Privacy Policy | Show Order | Contact Us |

Copyright ©1999-2002 Circo Technology, Corp. All Rights Reserved
 


http://www.rackmountmaster.com